Разлика между версии на „Use your digital signature in Mozilla Firefox in Linux“

от Infonotary
Направо към: навигация, търсене
(Installation in Mozilla Firefox and Thunderbird)
 
Ред 5: Ред 5:
  
  
== Installation in Mozilla Firefox and Thunderbird ==
+
== Install Infonotary certificate chain ==
  
The recommended way to set Firefox and Thunderbird is by [https://addons.mozilla.org/firefox/addon/infonotary-configurator-for-mo/ InfoNotary Configurator for Mozilla]. Once installed, this extension will set each as correct.
+
Before you can start using the certificate, you must install the Infonotary certificate chain.
  
== Testing installation ==
+
Certificate chain for certificates issued '''before''' 08.01.2018 - [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12].
  
To check if everything is set correctly, load [https://gate.infonotary.com/diagnostics/dumpcert.cgi test site InfoNotary]. If the setting is correct, you will see an inscription Data accepted. You can also do a local check by clicking "Sign text" in the settings of InfoNotary Mozilla Configurator.
+
Certificate chain for certificates issued '''after''' 08.01.2018 - [http://www.infonotary.com/site/files/InfoNotary_Qualified_eIDAS.p12 InfoNotary_Qualified_eIDAS.p12]
<!-- This section is redundant, since we have an extension for Mozilla, which does everything automatically -->
+
<!-- Manual configuration
+
  
== Manual configuration of Mozilla Firefox and Thunderbird ==
+
<!--You can find Infonotary root certificates in the Installation CD in folder “certificates” or on the web site [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12].-->
  
If you prefer to do setup, you must follow these steps:
+
Start '''Firefox Quantum'''. From the menu, choose '''Preferences'''.
  
=== Installing the certification chain InfoNotary ===
+
[[Файл:Preferences menu Linux.png|240px]]
  
Before working with your electronic signature certificate is required to install the base certificates InfoNotary. Certification chain can be found in directory "certificates" on the installation CD or [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12].
+
From '''Privacy & Security''', choose '''View Certificates'''.
  
Start Mozilla Firefox. From the Edit menu, select Preferences.
+
[[Файл:Privacy&SecurityLinux.png|750px]]
  
[[Картинка:Firefox linux preferences.png]]
+
Choose the tab '''Your certificates''' and click on '''Import'''.
  
Select the "Advanced", subsection "Encryption", as shown in the picture and click View Certificates .
+
[[Файл:View certificate Linux.png|750px]]
  
[[Картинка:Firefox linux certificate manager.png]]
+
Specify the path to certification chain - [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12] or [http://www.infonotary.com/site/files/InfoNotary_Qualified_eIDAS.p12 InfoNotary_Qualified_eIDAS.p12]
  
Click the Import button and specify the path to the setup file of the certification chain - INotaryCertChain.p12
+
[[Файл:Import Qualifief Linux.png|500px]]
  
Leave the Password field blank and click OK.
+
Leave the field blank and click '''OK'''.
  
[[Картинка:Firefox linux password entry dialog.png]]
+
[[Файл:Password Linux.png]]
  
Upon successful installation of the certification chain released the following message:
+
Newly installed certificates can be found in section '''Authorities'''.
  
[[Картинка:Firefox linux certificates imported.png]]
+
[[Файл:Edit Trust Linux.png|750px]]
  
Newly installed certificates can be found in section "Authorities":
+
In Mozilla for every certificate of a Certification Authority (CA) the user must choose a level of trust. This is done by selecting the certificate and clicking on '''Edit Trust'''. The easiest way to do this setting for the certificate "'''InfoNotary CSP Root'''" and/or "'''InfoNotary TSP Root'''" select two possible options. This will make all the InfoNotary trusted certificates for all operations.
  
[[Картинка:Firefox linux certificate manager authorities.png]]
+
[[Файл:Edit CA Linux.png]]
  
In the products of Mozilla, for every certificate of the Certification Authority (CA), the user must choose a level of trust. This is done by selecting the certificate and clicking on Edit. The easiest way to do this setting for the certificate "InfoNotary CSP Root" and select three possible options. This will make all the InfoNotary trusted certificates for all operations:
+
== Install software security module ==
  
[[Картинка:Firefox linux CA certificate trust settings.png]]
+
In order to use you digital certificate with Mozilla based applications like Firefox, Thunderbird etc., you must register PKCS#11 module, for your smart card. It is nessesary to install the drivers for the smart card before that.
  
If you want, you can specify only the required level of confidence. In this case, you must do the following:
+
Start Firefox Quantum. From the menu, choose '''Preferences'''.
  
* for certificates „i-Notary TrustPath Validated E-mail CA” check „This certificate can identify mail users”.
+
[[Файл:Preferences menu Linux.png|240px]]
* for certificates „i-Notary Personal Q Sign CA” check „This certificate can identify mail users”.
+
* for certificates „i-Notary Company Q Sign CA” check „This certificate can identify mail users”.
+
* for certificates „i-Notary TrustPath Validated Domain CA” check „This certificate can identify web sites”.
+
* Зfor certificates „i-Notary TrustPath CodeSign CA” check „This certificate can identify software makers”.  
+
  
Settings for the first three certificates will allow you to check the signature on a letter signed by a certificate of InfoNotary. Setting Q Sign CA certificates will also allow you to log into websites with your certificate. Setting the fourth statement "i-Notary TrustPath Validated Domain CA" is to allow your browser to know the certificates of the servers that use certificates InfoNotary. Last certificate is to validate correct signatures on software InfoNotary. This includes extensions for Firefox and Thunderbird.
+
From '''Privacy & Security''', choose '''Security Devices'''.
  
=== Registering hardware cryptographic module ===
+
[[Файл:Privavy&securityLinux sec dev.png|750px]]
  
In order to use your electronic signature certificate in Mozilla based programs such as Firefox, Thunderbird and Seamonkey, you must first register PKCS # 11 cryptographic module corresponding to the use of your smart card in them. For all based on Mozilla (Gecko) program registration is done in a similar manner.
+
To add a new device, choose '''Load'''.
  
Start Firefox or Thunderbird, if not released, and "Edit" menu select "Preferences". Click the "Advanced" section and choose "Encryption". Select "Security Devices" and click "Load":
+
[[Файл:Load device Linux.png|750px]]
  
[[Картинка:Firefox linux device manager 1.png]]
+
Change the name of the module (Module Name), as desired.
  
Here you can select PKCS # 11 module. If you use a driver Siemens, he / usr/local/lib/libsiecap11.so, for OpenSC depending on the method of installation is / usr/lib/opensc-pkcs11.so or / usr/local/lib/opensc-pkcs11. so. In some distributions is included and the unit / usr/lib/onepin-opensc-pkcs11.so. If you have it, it is advisable to use it.
+
[[Файл:Load PKCS11 Linux1.png]]
[[Image:Firefox linux load PKCS11 device.png]]
+
  
After you click OK, your smart card will appear in the device list
+
Choose PKCS#11 library, that correspondents to your smart card съответстващата на вашата смарт карта.
 +
'''OpenSC''' - in dependents of your distribution, which you use, it could be:
 +
* 64 bits Debian distributions (Debian, Ubuntu, Mint) - '''/usr/lib/x86_64-linux-gnu/opensc-pkcs11.so'''
 +
* 32 bits Debian distributions (Debian, Ubuntu, Mint) - '''/usr/lib/i386-linux-gnu/opensc-pkcs11.so'''
 +
* Old versions of Debian/Ubuntu and 32 bit versions of RedHat/Fedora - '''/usr/lib/opensc-pkcs11.so'''
 +
* 64 bit versions of RedHat/Fedora - '''/usr/lib64/opensc-pkcs11.so'''
  
[[Image:Firefox linux device manager 2.png]]
+
'''Bit4ID'''
 +
* Standart location - '''/usr/lib/libbit4ipki.so'''
 +
* 64 bit version of RedHat/Fedora - '''/usr/lib64/libbit4ipki.so'''
  
=== Changing the PIN ===
+
'''Siemens'''
 +
* Standart location - '''/usr/local/lib/libsiecap11.so'''
  
From this window you can change the PIN code of the smart card. To do this, select the card on the left side of the window, in this case, "Siemens (PIN)", and click "Change Password":
+
After you click '''OK''', your smart card will appear in the list of available devices.
 
+
[[Image:Firefox linux change PIN.png]]
+
 
+
Enter your current PIN code in the "Current password", and in the field "New password" and enter the new re-enter it for confirmation in the field "New password (again). "Password quality meter" shows how confident the new PIN code. Most smart cards support PIN codes with length from 4 to 16 characters.
+
-->
+
<!-- End of manual configuration -->
+
 
+
== Profile setting in Thunderbird ==
+
 
+
{{Шаблон:Настройка_на_потребителския_профил_в_Thunderbird}}
+
 
+
[[Категория:Инсталация и използване на удостоверения за електронен подпис]]
+
[[Категория:Linux]]
+
[[Категория:Помощ]]
+

Текуща версия към 11:59, 11 декември 2018

Before proceeding you must do

If you own a smart card reader InfoNotary but have not installed the drivers for it, follow the instructions Installation of smart card reader and smart card drivers in Linux.

  • IMPORTANT WHEN USING THE PRODICTS OF MOZILLA!!!: When you use Mozilla prodsucts you must know, that it uses direct access to smart cards. When we install succesfully certificates in Mozilla Firefox or Thunderbird , WE MUST NOT delete them from there, because that way we will delete them from the smart card along the public and private keys!


Install Infonotary certificate chain

Before you can start using the certificate, you must install the Infonotary certificate chain.

Certificate chain for certificates issued before 08.01.2018 - INotaryCertChain.p12.

Certificate chain for certificates issued after 08.01.2018 - InfoNotary_Qualified_eIDAS.p12


Start Firefox Quantum. From the menu, choose Preferences.

Preferences menu Linux.png

From Privacy & Security, choose View Certificates.

Privacy&SecurityLinux.png

Choose the tab Your certificates and click on Import.

View certificate Linux.png

Specify the path to certification chain - INotaryCertChain.p12 or InfoNotary_Qualified_eIDAS.p12

Import Qualifief Linux.png

Leave the field blank and click OK.

Password Linux.png

Newly installed certificates can be found in section Authorities.

Edit Trust Linux.png

In Mozilla for every certificate of a Certification Authority (CA) the user must choose a level of trust. This is done by selecting the certificate and clicking on Edit Trust. The easiest way to do this setting for the certificate "InfoNotary CSP Root" and/or "InfoNotary TSP Root" select two possible options. This will make all the InfoNotary trusted certificates for all operations.

Edit CA Linux.png

Install software security module

In order to use you digital certificate with Mozilla based applications like Firefox, Thunderbird etc., you must register PKCS#11 module, for your smart card. It is nessesary to install the drivers for the smart card before that.

Start Firefox Quantum. From the menu, choose Preferences.

Preferences menu Linux.png

From Privacy & Security, choose Security Devices.

Privavy&securityLinux sec dev.png

To add a new device, choose Load.

Load device Linux.png

Change the name of the module (Module Name), as desired.

Load PKCS11 Linux1.png

Choose PKCS#11 library, that correspondents to your smart card съответстващата на вашата смарт карта. OpenSC - in dependents of your distribution, which you use, it could be:

  • 64 bits Debian distributions (Debian, Ubuntu, Mint) - /usr/lib/x86_64-linux-gnu/opensc-pkcs11.so
  • 32 bits Debian distributions (Debian, Ubuntu, Mint) - /usr/lib/i386-linux-gnu/opensc-pkcs11.so
  • Old versions of Debian/Ubuntu and 32 bit versions of RedHat/Fedora - /usr/lib/opensc-pkcs11.so
  • 64 bit versions of RedHat/Fedora - /usr/lib64/opensc-pkcs11.so

Bit4ID

  • Standart location - /usr/lib/libbit4ipki.so
  • 64 bit version of RedHat/Fedora - /usr/lib64/libbit4ipki.so

Siemens

  • Standart location - /usr/local/lib/libsiecap11.so

After you click OK, your smart card will appear in the list of available devices.