Installation of smart card reader and smart card drivers in macOS: Разлика между версии
VasilBadev (беседа | приноси) |
Редакция без резюме |
||
(Не са показани 42 междинни версии от 4 потребители) | |||
Ред 1: | Ред 1: | ||
== What is nessesary to work with digital signature == | == What is nessesary to work with digital signature == | ||
In order to use your digital sigature is nessesary to install the driver for the smart card reader, the middleware for the smart card and the service for smart card resders (pcscd) running. The service pcscd must start automatically when you plug a reader. | In order to use your digital sigature is nessesary to install the driver for the smart card reader, the middleware for the smart card and the service for smart card resders (pcscd) running. The service pcscd must start automatically when you plug a reader. | ||
<!--== System requerments == | |||
== System requerments == | |||
The software requered to work with certificates on Mac, supports Mac OS X 10.5 or newer. | The software requered to work with certificates on Mac, supports Mac OS X 10.5 or newer. | ||
Support for 10.5 is paritial. All needed drivers work on 10.5 but InfoNotary software for signing of documents and card management does not. | Support for 10.5 is paritial. All needed drivers work on 10.5 but InfoNotary software for signing of documents and card management does not.--> | ||
== Driver for readers == | == Driver for readers == | ||
Ред 16: | Ред 10: | ||
[[Картинка:ACR_38T.png]] | [[Картинка:ACR_38T.png]] | ||
If the your reader is labeled with '''ACR38C-SPC-R''' | If the your reader is labeled with '''ACR38C-SPC-R''', '''mLector-S''' or '''ACR39T''' at the bottom, then your device works with the build in driver in the OS and you don't have to install any drivers. | ||
=== ACR 38U === | <!--=== ACR 38U === | ||
[[Картинка:ACR_38U.png]] | [[Картинка:ACR_38U.png]] | ||
Reader that are labeled ACR 38U,are not compatible with this driver, so if you use such a device you have to install driver from the [http://www.acs.com.hk/drivers-manual.php?driver=ACR38 site of the manifactorer]. | Reader that are labeled ACR 38U,are not compatible with this driver, so if you use such a device you have to install driver from the [http://www.acs.com.hk/drivers-manual.php?driver=ACR38 site of the manifactorer].--> | ||
=== | === Circle CIR115 === | ||
[ | For you to use Circle, you have to install the driver for your version of macOS: | ||
* [http://repository.infonotary.com/ra/Circle_Mac_Installer_v2.1.2.zip macOS 11 and later versions]. | |||
=== Omnikey (HID Global) === | |||
[[ | [[Картинка:CardMan6121.gif]]<!--[[Картинка:CardMan3021.png]]--> | ||
For you to use OmniKey CardMan, you have to install the driver from HID Global for your version of macOS: | |||
* За [https://repository.infonotary.com/ra/install/omnikey-macos-installer.dmg '''macOS 10.14 - 10.15''']. | |||
* За [https://repository.infonotary.com/ra/install/omnikey-macos-installer.pkg '''macOS 11 and later versions''']. | |||
* [ | |||
* [ | |||
== Install Smart Card driver == | == Install Smart Card driver == | ||
Depend of the model of your card you have to use different driver. The model of the card is on the Personal Access Rights, which you receive with your card. You can find your smart card model with our [http://repository.infonotary.com/install/sysinfo/SystemInfo.dmg diagnostic software tool] | |||
Depend of the model of your card you have to use different software. The model of the card is on the Personal Access Rights, which you receive with your card. In case your model is „'''T&S DS/2048 (L)'''“, you have to install [[#Install Bit4id Universal Middleware|Bit4id Universal Middleware]] | <!--Depend of the model of your card you have to use different software. The model of the card is on the Personal Access Rights, which you receive with your card. In case your model is „'''T&S DS/2048 (L)'''“, you have to install [[#Install Bit4id Universal Middleware|Bit4id Universal Middleware]]. If the model is „'''CardOS V4.3B (C)'''“, you have to install [[#Download and install OpenSC|OpenSC]]. | ||
Incase you dont have Personal Access Rights, you can check your card model with this command {{Шаблон:Console|pcsctest}} from terminal. She will ask you for the reader number, you have to press 1. If there is no problem with the reader installation you will get a row beginning with „Current Reader ATR Value“. Against this text is an indetifier for the card. | Incase you dont have Personal Access Rights, you can check your card model with this command {{Шаблон:Console|pcsctest}} from terminal. She will ask you for the reader number, you have to press 1. If there is no problem with the reader installation you will get a row beginning with „Current Reader ATR Value“. Against this text is an indetifier for the card. | ||
* For T&S DS/2048 the indentidier is „3B FF 18 00 FF 81 31 FE 55 00 6B 02 09 03 03 01 11 01 43 4E 53 11 31 80 8C“. | * For T&S DS/2048 the indentidier is „3B FF 18 00 FF 81 31 FE 55 00 6B 02 09 03 03 01 11 01 43 4E 53 11 31 80 8C“. | ||
* For CardOS V4.3 the indentidier is „3B F2 18 00 02 C1 0A 31 FE 58 C8 08 74“. | * For CardOS V4.3 the indentidier is „3B F2 18 00 02 C1 0A 31 FE 58 C8 08 74“.--> | ||
=== For smart card IDPrime === | |||
You can download the latest version for your OS from here: | |||
* For [https://repository.infonotary.com/ra/Middleware/SafeNet/macOS/SafeNetAuthenticationClient.10.8.267.0_Core.dmg '''macOS 11 and newer''']. | |||
After the installation continue with configuration for [[Using your digital signature with Firefox on MAC OS X|Firefox]] or [[Install Infonotary Certificate Chain on Mac OS X |Safari]]. | |||
=== For smart card Bit4ID/Idemia === | |||
''' | Please write to '''support@infonotary.com''' , and we will send you the driver. | ||
<!--In case you have to register the PKCS#11 module на Bit4id in a program different from Firefox, Thunderbird or InfoNotary Smart Card Manager you have to specify a path - /Library/bit4id/cryptoki/libbit4ipki.dylib.--> | |||
<!--You can download the latest version for your OS from here: | |||
* For [http://repository.infonotary.com/ra/bit4id-middleware-1.4.10.633.dmg '''macOS 10.15 and newer''']. | |||
* For [http://repository.infonotary.com/ | * For [http://repository.infonotary.com/ra/bit4id-MAC_OS-middleware-pinpad-1.4.9.395.dmg '''macOS 10.9 - 10.14'''].--> | ||
After the installation continue with configuration [[Using your digital signature with Firefox on MAC OS X |'''Firefox''']] or [[Install Infonotary Certificate Chain on Mac OS X |'''Safari''']]. | |||
=== | === For smart card Siemens CardOS === | ||
For smart card Siemens you must install OpenSC. '''With OpenSС you dont install any program with graphic interface so you wont find anything in Applications'''. | |||
You can download the latest version for your OS from here: | |||
* For [https://github.com/OpenSC/OpenSC/releases/download/0.21.0/OpenSC-0.21.0.dmg '''macOS 10.15 and newer''']. | |||
* [http://repository.infonotary.com/install/mac/ | * For [http://repository.infonotary.com/install/mac/OpenSC-0.16.0.dmg '''macOS 10.9 - 10.14''']. | ||
== | After the installation continue with configuration for [[Using your digital signature with Firefox on MAC OS X|Firefox]] or [[Install Infonotary Certificate Chain on Mac OS X |Safari]]. | ||
<!--=== Use both OpenSC and Bit4id Universal Middleware === | |||
In case you want to use both OpenSC and Bit4id Universal Middleware on the same computer you have to forbid OpenSC to access T&S DS/2048 smart cards. The easiest way to do it is to use following program: | |||
:[http://repository.infonotary.com/install/mac/FixOpenSC.app.tar.gz Disable Bit4id cards in OpenSC]. | |||
If you prefer to do it manually you can find instructions on [[Working with OpenSC#Forbid_OpenSC_to_work_with_a_specific_card | OpenSC page]].--> | |||
<!--This can easily be done by replacing the configuration file of OpenSC (/Library/OpenSC/etc/opensc.conf) with [http://repository.infonotary.com/install/mac/opensc.conf this one].--> | |||
== Testing Installation == | |||
If you have problem using your certificate, you can run the following program to identify it: | |||
* [http://repository.infonotary.com/install/sysinfo/SystemInfo.dmg Installation test for macOS] | |||
The program can send information directly to us. After report is accepted, it will show nine digit number, that can be used by our support team to see test result. If you do not have Internet connection or direct sending failed, you can save report and send it to [mailto:support@infonotary.com support@infonotary.com]. | |||
Reader and card should be connected to the computer when test program is started. | |||
[[Категория:Инсталация и използване на удостоверения за електронен подпис]] | [[Категория:Инсталация и използване на удостоверения за електронен подпис]] | ||
[[Категория: | [[Категория:MacOS]] | ||
[[Категория:Помощ]] | [[Категория:Помощ]] |
Текуща версия към 10:33, 7 септември 2023
What is nessesary to work with digital signature
In order to use your digital sigature is nessesary to install the driver for the smart card reader, the middleware for the smart card and the service for smart card resders (pcscd) running. The service pcscd must start automatically when you plug a reader.
Driver for readers
ACR 38C
If the your reader is labeled with ACR38C-SPC-R, mLector-S or ACR39T at the bottom, then your device works with the build in driver in the OS and you don't have to install any drivers.
Circle CIR115
For you to use Circle, you have to install the driver for your version of macOS:
Omnikey (HID Global)
For you to use OmniKey CardMan, you have to install the driver from HID Global for your version of macOS:
Install Smart Card driver
Depend of the model of your card you have to use different driver. The model of the card is on the Personal Access Rights, which you receive with your card. You can find your smart card model with our diagnostic software tool
For smart card IDPrime
You can download the latest version for your OS from here:
- For macOS 11 and newer.
After the installation continue with configuration for Firefox or Safari.
For smart card Bit4ID/Idemia
Please write to support@infonotary.com , and we will send you the driver.
After the installation continue with configuration Firefox or Safari.
For smart card Siemens CardOS
For smart card Siemens you must install OpenSC. With OpenSС you dont install any program with graphic interface so you wont find anything in Applications.
You can download the latest version for your OS from here:
- For macOS 10.15 and newer.
- For macOS 10.9 - 10.14.
After the installation continue with configuration for Firefox or Safari.
Testing Installation
If you have problem using your certificate, you can run the following program to identify it:
The program can send information directly to us. After report is accepted, it will show nine digit number, that can be used by our support team to see test result. If you do not have Internet connection or direct sending failed, you can save report and send it to support@infonotary.com.
Reader and card should be connected to the computer when test program is started.