Разлика между версии на „Installation of smart card reader and smart card drivers in Windows“

От Infonotary
Направо към: навигация, търсене
(Нова страница: The prefered way to install the drivers for the smart card reader and the smart card on MS Windows is through [http://repository.infonotary.com/install/PNPInstaller/PNPIns…)
 
Ред 1: Ред 1:
The prefered way to install the drivers for the smart card reader and the smart card on MS Windows is through [http://repository.infonotary.com/install/PNPInstaller/PNPInstaller.msi automatic installer for Infonotary]. The automatic installer defines what to install depend on:
+
The prefered way to install the drivers for the smart card reader and the smart card on MS Windows is through [http://repository.infonotary.com/install/PNPInstaller/PNPInstaller.msi automatic installer for Infonotary]. The automatic installer defines what to install depending on:
* your devices;
+
* devices you have;
 
* the version of the operating system;
 
* the version of the operating system;
  
== Before you proceed you must do ==
+
== Before you begin ==
  
 
[[Image:warning.jpg|32px]] Before you start the installer make sure that your devices are inserted.
 
[[Image:warning.jpg|32px]] Before you start the installer make sure that your devices are inserted.
Ред 9: Ред 9:
 
Please keep in mind that:
 
Please keep in mind that:
 
* In order to work the automatic installer requires an Internet connection;
 
* In order to work the automatic installer requires an Internet connection;
* The process of the installation may take different amount of time, depend on your Internet connection.
+
* The process of the installation may take different amount of time, depending off your Internet connection.
  
 
== Using InfoNotary PNP Installer ==
 
== Using InfoNotary PNP Installer ==
  
If Infontary PNP Installer is already installed you may start it from [Start]->All Programs->Infonotary->PNP Installer->Infonotary Software Installation. In case is not you can download it from  
+
If Infontary PNP Installer is already installed you may start it from [Start]->All Programs->Infonotary->PNP Installer->Infonotary Software Installation. In case it is not installed, you can download it from  
 
[http://repository.infonotary.com/install/PNPInstaller/PNPInstaller.msi here].
 
[http://repository.infonotary.com/install/PNPInstaller/PNPInstaller.msi here].
  
 
[[Файл:PNPInstaller.png]]
 
[[Файл:PNPInstaller.png]]
  
If “Standart Installation” is checked it will install all the drivers and softwares. If you want to confige every application separatly, please uncheck “Standart Installation” before clicking “Next >”.
+
If “Unattended setup” is checked it will install all the drivers and softwares. If you want to configure every application separately, please uncheck “Unattended setup” before clicking “Next >”.
  
 
[[Категория:Инсталация и използване на удостоверения за електронен подпис]]
 
[[Категория:Инсталация и използване на удостоверения за електронен подпис]]
 
[[Категория:Windows]]
 
[[Категория:Windows]]
 
[[Категория:Помощ]]
 
[[Категория:Помощ]]

Версия от 17:58, 25 февруари 2015

The prefered way to install the drivers for the smart card reader and the smart card on MS Windows is through automatic installer for Infonotary. The automatic installer defines what to install depending on:

  • devices you have;
  • the version of the operating system;

Before you begin

Warning.jpg Before you start the installer make sure that your devices are inserted.

Please keep in mind that:

  • In order to work the automatic installer requires an Internet connection;
  • The process of the installation may take different amount of time, depending off your Internet connection.

Using InfoNotary PNP Installer

If Infontary PNP Installer is already installed you may start it from [Start]->All Programs->Infonotary->PNP Installer->Infonotary Software Installation. In case it is not installed, you can download it from here.

PNPInstaller.png

If “Unattended setup” is checked it will install all the drivers and softwares. If you want to configure every application separately, please uncheck “Unattended setup” before clicking “Next >”.