Installation of smart card reader and smart card drivers in Linux: Разлика между версии

От Infonotary
Направо към навигацията Направо към търсенето
Редакция без резюме
Ред 1: Ред 1:
== Installing the driver for the reader ==
<!--== Installing the driver for the reader ==


All readers, offered by InfoNotary EAD have drivers for Linux, which can be downloaded from the website of the manufacturer's - [http://www.hidglobal.com/drivers?field_brand_tid=24&product_id=3944&os=All OmniKey] or [http://www.acs.com.hk/index.php?pid=drivers&id=ACR38T ACS]. In some cases, these drivers can be installed directly through the packaging system of your distribution.
All readers, offered by InfoNotary EAD have drivers for Linux, which can be downloaded from the website of the manufacturer's - [http://www.hidglobal.com/drivers?field_brand_tid=24&product_id=3944&os=All OmniKey] or [http://www.acs.com.hk/index.php?pid=drivers&id=ACR38T ACS]. In some cases, these drivers can be installed directly through the packaging system of your distribution.
Ред 7: Ред 7:


[[Image:WarningYellow.png|32px]] In some distributions, together with the installation of pcscd installed and alternate demon Management readers -'' 'openct'''. For correct operation of the reader will have to deinstalrate or if it can not be done without removing and pcscd, forbid him to run.
[[Image:WarningYellow.png|32px]] In some distributions, together with the installation of pcscd installed and alternate demon Management readers -'' 'openct'''. For correct operation of the reader will have to deinstalrate or if it can not be done without removing and pcscd, forbid him to run.
<!--
 
You can check whether pcscd working with the command {{Шаблон:Console|ps ax &#124; grep pcscd &#124; grep -v "grep pcscd"}}, released from the terminal. Should display something like this: {{Шаблон:ConsoleOutput|3446 ?        Ssl    0:01 /usr/sbin/pcscd}}
If it shows nothing, so the demon does not work.
-->


=== Types of readers ===
=== Types of readers ===
Ред 98: Ред 95:
Reader and card should be connected to the computer when test program is started.
Reader and card should be connected to the computer when test program is started.


This program uses one of following packages to show its user interface - python-tk for Debian/Ubuntu, tkinter for Fedora/RedHat or zenity. If you do not have any of them installed, it will still work, but only from terminal.
This program uses one of following packages to show its user interface - python-tk for Debian/Ubuntu, tkinter for Fedora/RedHat or zenity. If you do not have any of them installed, it will still work, but only from terminal.-->

Версия от 10:20, 22 юни 2022

Взето от „http://wiki.infonotary.com/index.php?title=Installation_of_smart_card_reader_and_smart_card_drivers_in_Linux&oldid=2379“.