Разлика между версии на „Configuring Firefox Quantum on Mac OS“

От Infonotary
Направо към навигацията Направо към търсенето
 
(Не са показани 3 междинни версии от същия потребител)
Ред 1: Ред 1:
 
== Before you proceed you must do ==
 
== Before you proceed you must do ==
  
* If you have smart card reader and smart card from Infonotary, but you didn't install the drivers for them do the following [[Installation of smart card reader and smart card drivers in Windows]]
+
* If you have smart card reader and smart card from InfoNotary, but you didn't install the drivers for them do the following [[Installation of smart card reader and smart card drivers in Mac OS X]]
  
* '''IMPORTANT WHEN USING THE PRODICTS OF MOZILLA!!!:''' When you use Mozilla prodsucts you must know, that it uses direct access to smart cards. When we install succesfully certificates in Mozilla Firefox or Thunderbird , '''WE MUST NOT''' delete them from there, because that way we will delete them from the smart card along the public and private keys!
+
* '''IMPORTANT :''' In the information message "Please enter the '''master password for InfoNotary'''", enter your PIN code.
 +
 
 +
* '''IMPORTANT :''' Firefox and Thunderbird use direct access to the smart card. When you have successfully installed your certificates, you '''SHOULD NOT''' delete them from there, as this will also delete the certificate, along with the private and public keys on the smart card. After that, the certificate cannot be restored and a new one must be issued.
 +
 
 +
* '''IMPORTANT :''' In order to use your certificate with Firefox and Thunderbird, the reader must be on your computer before opening the program.
  
  
 
== Install Infonotary certificate chain ==
 
== Install Infonotary certificate chain ==
  
Before you can start using the certificate, you must install the Infonotary certificate chain.
+
<!--Before you can start using the certificate, you must install the Infonotary certificate chain.
  
 
Certificate chain for certificates issued before 08.01.2018 - [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12].
 
Certificate chain for certificates issued before 08.01.2018 - [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12].
  
Certificate chain for certificates issued after 08.01.2018 - [http://www.infonotary.com/site/files/InfoNotary_Qualified_eIDAS.p12 InfoNotary_Qualified_eIDAS.p12]
+
Certificate chain for certificates issued after 08.01.2018 - [http://www.infonotary.com/site/files/InfoNotary_Qualified_eIDAS.p12 InfoNotary_Qualified_eIDAS.p12]-->
 +
 
  
<!--You can find Infonotary root certificates in the Installation CD in folder “certificates” or on the web site [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12].-->
 
  
 
Start '''Firefox Quantum'''. From the menu, choose '''Preferences'''.
 
Start '''Firefox Quantum'''. From the menu, choose '''Preferences'''.
Ред 28: Ред 32:
 
[[Файл:MenuFirefoxquantum2cert.png|750px]]
 
[[Файл:MenuFirefoxquantum2cert.png|750px]]
  
Specify the path to certification chain - [http://www.infonotary.com/site/files/INotaryCertChain.p12 INotaryCertChain.p12] or [http://www.infonotary.com/site/files/InfoNotary_Qualified_eIDAS.p12 InfoNotary_Qualified_eIDAS.p12]
+
Specify the path to certification chain - [http://www.infonotary.com/site/files/InfoNotary_Qualified_eIDAS.p12 InfoNotary_Qualified_eIDAS.p12]
  
 
[[Файл:ChoosecertMac.png|500px]]
 
[[Файл:ChoosecertMac.png|500px]]
Ред 40: Ред 44:
 
[[Файл:MenuFirefoxquantum5cert.png|750px]]
 
[[Файл:MenuFirefoxquantum5cert.png|750px]]
  
In Mozilla for every certificate of a Certification Authority (CA) the user must choose a level of trust. This is done by selecting the certificate and clicking on '''Edit Trust'''. The easiest way to do this setting for the certificate "'''InfoNotary CSP Root'''" and/or "'''InfoNotary TSP Root'''" select two possible options. This will make all the InfoNotary trusted certificates for all operations.
+
In Mozilla for every certificate of a Certification Authority (CA) the user must choose a level of trust. This is done by selecting the certificate and clicking on '''Edit Trust'''. The easiest way to do this setting for the certificate <!--"'''InfoNotary CSP Root'''" and/or -->"'''InfoNotary TSP Root'''" select two possible options. This will make all the InfoNotary trusted certificates for all operations.
  
 
[[Файл:MenuFirefoxMacQuantumTrust.png]]
 
[[Файл:MenuFirefoxMacQuantumTrust.png]]
Ред 62: Ред 66:
 
Change the name of the module (Module Name), as desired.
 
Change the name of the module (Module Name), as desired.
  
[[Файл:MenuFirefoxquantum3secdev.png]]
+
[[Файл:MenuFirefoxMacQuantumLoadModule.png]]
  
 
Select PKCS # 11 library corresponding to your smart card.
 
Select PKCS # 11 library corresponding to your smart card.

Текуща версия към 15:09, 11 февруари 2021

Before you proceed you must do

  • IMPORTANT : In the information message "Please enter the master password for InfoNotary", enter your PIN code.
  • IMPORTANT : Firefox and Thunderbird use direct access to the smart card. When you have successfully installed your certificates, you SHOULD NOT delete them from there, as this will also delete the certificate, along with the private and public keys on the smart card. After that, the certificate cannot be restored and a new one must be issued.
  • IMPORTANT : In order to use your certificate with Firefox and Thunderbird, the reader must be on your computer before opening the program.


Install Infonotary certificate chain

Start Firefox Quantum. From the menu, choose Preferences.

MenuFirefoxMacOS.png

From Privacy & Security, choose View Certificates.

MenuFirefoxMacQuantumVC.png

Choose the tab Your certificates and click on Import.

MenuFirefoxquantum2cert.png

Specify the path to certification chain - InfoNotary_Qualified_eIDAS.p12

ChoosecertMac.png

Leave the field blank and click OK.

MenuFirefoxMacEncryptPass.png

Newly installed certificates can be found in section Authorities.

MenuFirefoxquantum5cert.png

In Mozilla for every certificate of a Certification Authority (CA) the user must choose a level of trust. This is done by selecting the certificate and clicking on Edit Trust. The easiest way to do this setting for the certificate "InfoNotary TSP Root" select two possible options. This will make all the InfoNotary trusted certificates for all operations.

MenuFirefoxMacQuantumTrust.png

Install software security module

In order to use you digital certificate with Mozilla based applications like Firefox, Thunderbird etc., you must register PKCS#11 module, for your smart card. It is nessesary to install the drivers for the smart card before that.

Start Firefox Quantum. From the menu, choose Preferences.

MenuFirefoxMacOS.png

From Privacy & Security, choose Security Devices.

MenuFirefoxMacQuantumSDev.png

To add a new device, choose Load.

MenuFirefoxquantum2secdev.png

Change the name of the module (Module Name), as desired.

MenuFirefoxMacQuantumLoadModule.png

Select PKCS # 11 library corresponding to your smart card.

  • OpenSC - /Library/OpenSC/lib/opensc-pkcs11.so
  • Bit4ID - /Library/bit4id/pkcs11/libbit4ipki.dylib
  • Siemens - /usr/local/lib/libsiecap11.dylib

After you click OK, your smart card will appear in the list of available devices.

MenuFirefoxquantum4secdev.PNG