Use repositories of InfoNotary: Разлика между версии

От Infonotary
Направо към навигацията Направо към търсенето
Редакция без резюме
 
(Не са показани 9 междинни версии от 3 потребители)
Ред 1: Ред 1:
For your convenience InfoNotary offers repositories with deb and rpm packages for software that is not open source.
<!--For your convenience, InfoNotary offers repositories for deb and rpm packages for non-open source software.-->


== For Fedora, RedHat or CentOS ==
== For Ubuntu 21.04 and older, Debian and Mint ==
<!--1. Add public PGP key of InfoNotary:
{{Шаблон:ConsoleOutput|su<br/>
rpm --import http://repository.infonotary.com/install/linux/INotaryCodeSigning.key.asc}}
<br/>
2. Download the configuration file in the directory where information for Yum repositories is stored:
{{Шаблон:ConsoleOutput|wget -P /etc/yum.repos.d http://repository.infonotary.com/install/linux/infonotary.repo}}
<br/>
[[Image:warning.jpg|32px]] Tested on Fedora 10+.
<br/><br/>-->
To register InfoNotary repository in yum or dnf you must install this [http://repository.infonotary.com/install/linux/RPMS/infonotary-repository-1-1.noarch.rpm rpm package] with the following command in terminal:
{{Шаблон:ConsoleOutput|sudo rpm -Uvh http://repository.infonotary.com/install/linux/RPMS-test/infonotary-repository-1-1.noarch.rpm}}


All packages are signed with gpg key with following fingerprint:
<!--The following commands must be entered in a terminal. You can read what a terminal is and how it runs in the [https://help.ubuntu.com/community/UsingTheTerminal documentation of Ubuntu] or in [http://askubuntu.com/a/38220 this answer in askubuntu].-->
:'''9c14 29cf 1cdb 76bd 5efe 9cf1 ade8 9959 0dae 44fe'''
 
1. Add the InfoNotary PGP key to the apt trusted key list:
{{Шаблон:ConsoleOutput|wget -qO - <nowiki>https://repository.infonotary.com/install/linux/INotaryCodeSigningD.key.asc</nowiki> &#124; sudo apt-key add -}}
 
2. Download the configuration file to the directory where the apt repository information is stored:
{{Шаблон:ConsoleOutput|sudo wget <nowiki>https://repository.infonotary.com/install/linux/infonotary.list</nowiki> -qO /etc/apt/sources.list.d/infonotary.list}}
 
3. Update the repository information with the following command:
{{Шаблон:ConsoleOutput|sudo apt-get update}}
 
== For Ubuntu 22.04 ==


== For Debian, Ubuntu and Mint ==
The following commands must be entered in terminal. You can read what is terminal and hot to use it in [https://help.ubuntu.com/community/UsingTheTerminal Ubuntu documentation] or in [http://askubuntu.com/a/38220 answer in askubuntu].


1. Add InfoNotary public PGP key to the list of trusted APT keys:
1. Add the InfoNotary PGP key to the apt trusted key list:
{{Шаблон:ConsoleOutput|wget -qO - http://repository.infonotary.com/install/linux/INotaryCodeSigning.key.asc | sudo apt-key add -}}
{{Шаблон:ConsoleOutput|wget -qO - <nowiki>https://repository.infonotary.com/install/linux/INotaryCodeSigningD.key.asc | sudo tee /etc/apt/trusted.gpg.d/INotaryCodeSigningD.key.asc</nowiki>}}


2. Download repository configuration file in apt configuration directory:
2. Download the configuration file to the directory where the apt repository information is stored:
{{Шаблон:ConsoleOutput|sudo wget http://repository.infonotary.com/install/linux/infonotary.list -qO /etc/apt/sources.list.d/infonotary.list}}
{{Шаблон:ConsoleOutput|sudo wget <nowiki>https://repository.infonotary.com/install/linux/infonotary_u2204.list -qO /etc/apt/sources.list.d/infonotary.list</nowiki>}}


3. Update information for repositories with the following command:
3. Update the repository information with the following command:
{{Шаблон:ConsoleOutput|sudo apt-get update}}
{{Шаблон:ConsoleOutput|sudo apt-get update}}


After completing the above steps, you will be able to install the software from the repository via apt-get, aptitude, Software Center or Synaptic.


[[Image:warning.jpg|32px]] Tested on Ubuntu 9.04+.
=== Installation of programs from the repository===
Installation for Bit4id smart cards:
{{Шаблон:ConsoleOutput|sudo apt-get install bit4id-ipki}}
Installation for Siemens smart cards:
{{Шаблон:ConsoleOutput|sudo apt-get install opensc}}
<!--Installation for OmniKey smart card reader:
{{Шаблон:ConsoleOutput|sudo apt-get install pcsc-omnikey}}-->
Installation of our smart card management software (Smart Card Manager) and for signing documents (e-Doc Signer)
{{Шаблон:ConsoleOutput|sudo apt-get install infonotary-client-software}}
 
* '''IMPORTANT for Ubuntu 22.04: After installing the driver for your smart card is necessary to start PC/SC Smart Card Daemon.'''
'''Please, write the following commands in terminal: '''
{{Шаблон:ConsoleOutput|systemctl enable pcscd}}
{{Шаблон:ConsoleOutput|service pcscd start}}
 
== For Fedora, RHEL, CentOS ==
To register the Infonotary repository in yum or dnf, you need to install the following [http://repository.infonotary.com/install/linux/RPMS/infonotary-repository-1-1.noarch.rpm rpm package]. This can be done with the following command:
{{Шаблон:ConsoleOutput|sudo rpm -Uvh <nowiki>https://repository.infonotary.com/install/linux/RPMS/infonotary-repository-1-1.noarch.rpm</nowiki>}}
All packages in the repository are signed with a gpg key with the following fingerprint:
 
:'''9c14 29cf 1cdb 76bd 5efe 9cf1 ade8 9959 0dae 44fe'''


[[Категория:Инсталация и използване на удостоверения за електронен подпис]]
=== Installation of programs from the repository===
[[Категория:Linux]]
Installation for Bit4id smart cards:
[[Категория:Помощ]]
{{Шаблон:ConsoleOutput|sudo yum install bit4id-ipki}}
Installation for Siemens smart cards:
{{Шаблон:ConsoleOutput|sudo yum install opensc}}
Installation of our smart card management software (Smart Card Manager) and for signing documents (e-Doc Signer)
{{Шаблон:ConsoleOutput|sudo yum install infonotary-client-software}}

Текуща версия към 16:57, 23 юни 2022


For Ubuntu 21.04 and older, Debian and Mint

1. Add the InfoNotary PGP key to the apt trusted key list:

wget -qO - https://repository.infonotary.com/install/linux/INotaryCodeSigningD.key.asc | sudo apt-key add -

2. Download the configuration file to the directory where the apt repository information is stored:

sudo wget https://repository.infonotary.com/install/linux/infonotary.list -qO /etc/apt/sources.list.d/infonotary.list

3. Update the repository information with the following command:

sudo apt-get update

For Ubuntu 22.04

1. Add the InfoNotary PGP key to the apt trusted key list:

wget -qO - https://repository.infonotary.com/install/linux/INotaryCodeSigningD.key.asc | sudo tee /etc/apt/trusted.gpg.d/INotaryCodeSigningD.key.asc

2. Download the configuration file to the directory where the apt repository information is stored:

sudo wget https://repository.infonotary.com/install/linux/infonotary_u2204.list -qO /etc/apt/sources.list.d/infonotary.list

3. Update the repository information with the following command:

sudo apt-get update

After completing the above steps, you will be able to install the software from the repository via apt-get, aptitude, Software Center or Synaptic.

Installation of programs from the repository

Installation for Bit4id smart cards:

sudo apt-get install bit4id-ipki

Installation for Siemens smart cards:

sudo apt-get install opensc

Installation of our smart card management software (Smart Card Manager) and for signing documents (e-Doc Signer)

sudo apt-get install infonotary-client-software
  • IMPORTANT for Ubuntu 22.04: After installing the driver for your smart card is necessary to start PC/SC Smart Card Daemon.

Please, write the following commands in terminal:

systemctl enable pcscd
service pcscd start

For Fedora, RHEL, CentOS

To register the Infonotary repository in yum or dnf, you need to install the following rpm package. This can be done with the following command:

sudo rpm -Uvh https://repository.infonotary.com/install/linux/RPMS/infonotary-repository-1-1.noarch.rpm

All packages in the repository are signed with a gpg key with the following fingerprint:

9c14 29cf 1cdb 76bd 5efe 9cf1 ade8 9959 0dae 44fe

Installation of programs from the repository

Installation for Bit4id smart cards:

sudo yum install bit4id-ipki

Installation for Siemens smart cards:

sudo yum install opensc

Installation of our smart card management software (Smart Card Manager) and for signing documents (e-Doc Signer)

sudo yum install infonotary-client-software