Use repositories of InfoNotary

От Infonotary
Направо към навигацията Направо към търсенето
Версията за печат вече не се поддържа и може да има грешки при изобразяване. Моля, актуализирайте отметките на браузъра си и вместо това използвайте функцията за печат на браузъра по подразбиране.


For Ubuntu 21.04 and older, Debian and Mint

1. Add the InfoNotary PGP key to the apt trusted key list:

wget -qO - https://repository.infonotary.com/install/linux/INotaryCodeSigningD.key.asc | sudo apt-key add -

2. Download the configuration file to the directory where the apt repository information is stored:

sudo wget https://repository.infonotary.com/install/linux/infonotary.list -qO /etc/apt/sources.list.d/infonotary.list

3. Update the repository information with the following command:

sudo apt-get update

For Ubuntu 22.04

1. Add the InfoNotary PGP key to the apt trusted key list:

wget -qO - https://repository.infonotary.com/install/linux/INotaryCodeSigningD.key.asc | sudo tee /etc/apt/trusted.gpg.d/INotaryCodeSigningD.key.asc

2. Download the configuration file to the directory where the apt repository information is stored:

sudo wget https://repository.infonotary.com/install/linux/infonotary_u2204.list -qO /etc/apt/sources.list.d/infonotary.list

3. Update the repository information with the following command:

sudo apt-get update

After completing the above steps, you will be able to install the software from the repository via apt-get, aptitude, Software Center or Synaptic.

Installation of programs from the repository

Installation for Bit4id smart cards:

sudo apt-get install bit4id-ipki

Installation for Siemens smart cards:

sudo apt-get install opensc

Installation of our smart card management software (Smart Card Manager) and for signing documents (e-Doc Signer)

sudo apt-get install infonotary-client-software
  • IMPORTANT for Ubuntu 22.04: After installing the driver for your smart card is necessary to start PC/SC Smart Card Daemon.

Please, write the following commands in terminal:

systemctl enable pcscd
service pcscd start

For Fedora, RHEL, CentOS

To register the Infonotary repository in yum or dnf, you need to install the following rpm package. This can be done with the following command:

sudo rpm -Uvh https://repository.infonotary.com/install/linux/RPMS/infonotary-repository-1-1.noarch.rpm

All packages in the repository are signed with a gpg key with the following fingerprint:

9c14 29cf 1cdb 76bd 5efe 9cf1 ade8 9959 0dae 44fe

Installation of programs from the repository

Installation for Bit4id smart cards:

sudo yum install bit4id-ipki

Installation for Siemens smart cards:

sudo yum install opensc

Installation of our smart card management software (Smart Card Manager) and for signing documents (e-Doc Signer)

sudo yum install infonotary-client-software